AAASewing.com
14
Direct PC-Link
This machine can be connected to the PC with the
USB cable included as standard accessory.
You need
Digitizer MB for multi-needle
software
(optional item) to operate the machine via direct
PC-link.
Connecting the Machine and PC
Start up the machine and PC, and insert the type
A
USB connector in to the PC.
Insert the type
B
USB connector into the USB port
on the machine.
q
Type
A
USB connector
w
Type
B
USB connector
Transfer the embroidery pattern data files between
the machine and PC by using optional
Digitizer
MB for multi-needle
.
After the data transfer is finished, the LCD screen
will show the Ready to Sew mode display or return
to the previous screen, depending on the setting
you have made on
Digitizer MB for multi-needle
.
CAUTION:
Do not turn the power switch off or disconnect the
USB cable while the data transfer is in progress.
Otherwise the data will be lost or the memory will
be damaged.
NOTE:
Refer to instruction book of optional
Digitizer MB
for multi-needle
for further details.
PC
M
q
w
Janome MB4 Embroidery Machine Instruction Manual
MB-4 Embroidery Machine
www.aaasewing.com
MB4 Owners Manual/ User Guide
