AAASewing.com
72
Trim Tail Length
Thread Break Stitch Count
Locking stitch
(after color change)
Locking stitch
(after thread trimming)
M
8
Trim Tail Length
Thread Break Stitch Count
Locking stitch
(after color change)
Locking stitch
(after thread trimming)
M
8
Trim Tail Length
Thread Break Stitch Count
Locking stitch
(after color change)
Locking stitch
(after thread trimming)
M
8
Trim Tail Length
Thread Break Stitch Count
Locking stitch
(after color change)
Locking stitch
(after thread trimming)
M
8
¤0
Setting the trim tail length
Some times you need to adjust the tail length of the
thread being trimmed depending on the thickness
and type of the thread.
Press the circle key next to “+” or “–“ to adjust the
trim length.
q
Circle keys (+, –)
You can select one of the following options.
S: Short
M: Medium
L: Long
¤1
Setting the thread breakage sensor
You can adjust the sensitivity of the thread brakage
sensor by setting stitch count to judge thread
breakage. Press the circle key next to “+” or “–“ to
adjust the sensitivity.
q
Circle keys (+, –)
The adjustable range is from 3 to 16.
The higher the number, the lower the sensitivity.
Reduce the sensitivity to avoid false thread breakage
due to short stitches.
¤2
Locking stitch ON/OFF (after color change)
The threads may ravel if the stitch data does not
contain locking stitches at the beginning of each color
section.
To avoid raveling, insert locking stitches at the
beginning by pressing the circle key next to “ON”.
Press the circle key next to “OFF” to disable this
function.
w
Circle keys (ON, OFF)
¤3
Locking stitch ON/OFF (after thread trimming)
If you turn ON the jump thread trimming (refer to the
previous page), insert locking stitches after the jump
to avoid threads from raveling.
Press the circle key next to “ON” or “OFF” to turn on
or off the function.
w
Circle keys (ON, OFF)
q
q
¤1
w
¤2
w
¤3
¤0
Janome MB4 Embroidery Machine Instruction Manual
MB-4 Embroidery Machine
www.aaasewing.com
MB4 Owners Manual/ User Guide
