AAASewing.com
19
Edit
Mode
1
2
3
4
5
6
7
8
Designs
Hoop Size A(F): 126
X
110mm
A Z
(1)
(2)
(3)
(5)
(4)
KEY OPERATIONS
Pattern Selection Window
When the machine is turned on, the pattern selection
window appears on the visual touch screen.
NOTE:
After turning on the power, it takes approximately six
seconds for the pattern selection window to be
displayed on the visual touch screen.
(This is the required boot up time and is not a defect)
Press the Mode key to open the mode selection
window.
You can select one of three modes by pressing the
corresponding key.
(1) File open key
You can recall the designs that you have saved.
(2) SET key
You can customize the machine settings to your
preference.
(3) Help key
You can view the help topics for basic operations.
(4) Return carriage key
Press the return carriage key to bring the carriage back
to its stored position after finishing embroidery.
(5) Return key
Pressing this key will close the mode selection window
and return to the previous screen.
NOTE:
Before you turn the power switch OFF in Embroidery
Mode, always be sure to press the return carriage key
to return the carriage to its stored position.
Janome MC300E Instruction Manual
Janome Embroidery Machine
www.aaasewing.com
MC300E Owners Manual/ User Guide
