14
MC 9900
Replacing X-sensor
•
Removing X-sensor
z
Disconnect the connector from printed circuit board
S1.
Pry up the lock tab of the connector with a precision
driver and pull out the brown
e
, orange
q
and red
w
cords.
x
Remove the setscrew
r
and
t
to remove the cord
guide plates.
Remove the tube from the cord guide plate.
w
q
e
Precision screwdriver
e
c
Remove the setscrew
y
.
Remove the X-sensor.
w
q
e
Precision screwdriver
•
Attaching X-sensor
v
Insert the brown
e
, orange
q
and red
w
cords
to the connector. Be sure that the cords are firmly
locked to the connector.
b
Attach the connector to the printed circuit board S1.
Place the tube in the cord guide plates.
y
q
w
r
t
