JanomeFlyer.com
6
q
w
e
q
w
Winding the bobbin
Removing the bobbin
z
Slide the hook cover plate release button to the right,
and remove the hook cover plate.
z
x
z
x
x
Lift out the bobbin from the bobbin holder.
q
Hook cover plate release button
w
Hook cover plate
e
Bobbin
Setting the spool of thread
z
Place the spool of thread on the spool pin with the
thread coming off the spool as shown. Attach the large
spool holder, and press it firmly against the spool of
thread.
q
Large spool holder
w
e
r
q
x
Use the small spool holder to hold narrow or small
spools of thread.
w
Small spool holder
Additional spool pin
Use the additional spool pin when you need to wind the
bobbin without unthreading the machine while working
on an embroidery.
Insert the additional spool pin into the spool stand and
then into the hole beside the horizontal spool pin.
Place the felt on the spool pin and place a spool of
thread on it as shown.
q
Additional spool pin
w
Spool stand
e
Hole
r
Felt
Janome 200E Embroidery Machine Instruction Manual
www.janomeflyer.com
200E Owners Manual/ User Guide
