25
• • • • • • • • • •
e
q
w
r
Automatic buttonhole (BH1 )
q
R: Automatic buttonhole foot
*
To alter the stitch width and density, refer to
page 23.
To sew:
z
Pull the button holder to the far back.
x
Insert the fabric under the foot.
Remove the fabric to the left to draw both thread to
the left.
c
Insert the garment under the foot, and lower the
needle at the starting point.
Then lower the automatic buttonhole foot.
q
Button holder
w
Needle thread
e
Bobbin thread
r
Starting point
z x c
R 1 5
AUT
SAME SIZE
• • • • • •
COMPLETED
• • • • • •
3
STEP
• • • • • • • • • •
2
STEP
• • • • • • • • • •
1
STEP
,
m
n
b
v
q
v
Sew the desired length for the left side of the
buttonhole and stop.
b
Press the reverse button.
Depress the foot control.
The machine will automatically bartack and sew up the
right side of the buttonhole.
n
Stop the machine when you are 2 or 3 stitches past the
first stitch on the left hand side.
m
Press the reverse button.
Keep the foot control depressed.
,
The machine will bartack, knot the stitches and stop
sewing by itself.
To make the next buttonhole, position the fabric and
step down on the foot control.
The Memory Craft will sew another buttonhole
identical to the first, each time you step down on the
foot control.
*
To reinforce the buttonhole or make it denser,
simply depress the foot control again without
raising the buttonhole foot.
Summary of Contents for memory craft 2400
Page 1: ...2400 INSTRUCTION BOOK...
