20
Threading the Machine
Raise the presser foot lifter.
Turn the power switch on.
Press the up/down needle position button twice to raise
the needle.
q
Up/down needle position button
Turn the power switch off.
z
Draw the thread around and under the upper thread
guide while holding the thread at the spool.
w
Upper thread guide
x
Draw the thread down along the right channel.
Then turn around the bottom of the guide plate.
e
Guide plate
c
Firmly draw the thread up to the take-up lever.
Slip the thread through the slit and into the eye of the
take-up lever.
r
Slit
t
Eye of take-up lever
v
Then down through the lower thread guide.
y
Lower thread guide
b
Slide the thread behind the needle bar thread guide
on the left. Thread the needle from front to back or use
the needle threader.
u
Needle bar thread guide.
Thread the needle using the needle threader (see the next
page).
q
w
e
r
t
u
y
z
x
c
v
b
z
x
c
v
b
Summary of Contents for MEMORY CRAFT 5200 -
Page 1: ...Janome Memory Craft 5200 Instruction Manual...
Page 81: ...844 800 020 E...
