75
Replacing the Light Bulb
WARNING:
Turn the power off before replacing the light bulb.
The bulb could be HOT, wait until it has cooled down before
touching it.
To remove:
Open the face cover.
Pull out the bulb from the lamp socket.
To replace:
Insert a new bulb into the opening of the socket.
Close the face cover.
q
Face cover
w
Bulb
e
Lamp socket
Replace the bulb with the same type, rated 12 V, 5 W.
Replacing the light bulb on the underside of the sewing
arm
z
Lay the machine on its back.
x
Remove the clear window with the screwdriver as shown.
q
Clear window
c
Pull out the lamp holder from the opening by hooking the
holder plate with your fingertip.
w
Holder plate
v
Pull out the light bulb from the lamp socket.
e
Light bulb
r
Lamp socket
b
Insert a new bulb into the socket.
n
Push the lamp holder back into the opening.
m
Attach the window into the opening on the machine.
Replace the bulb with the same type, rated 12 V, 5 W.
x
z
c
v
b
n
m
q
w
e
r
q
w
e
Summary of Contents for MEMORY CRAFT 5200 -
Page 1: ...Janome Memory Craft 5200 Instruction Manual...
Page 81: ...844 800 020 E...
