JanomeFlyer.com
69
Insert an additional spool pin, and put a felt and spool
on it.
Draw both threads from the spools and pass them
through the threading points from 1 to 5 .
Make sure that the two strings of thread from the
spools do not get tangled.
NOTES:
Make sure each threads wind off from the spools as
shown.
Threading from points 1 to 5 is the same as for a
single needle.
Slip one of the threads through the needle bar thread
guide on the left, and the other one on the right.
Thread the needles from the front to back.
NOTES:
The Built-in Needle Threader cannot be used for the
twin needle.
When changing the sewing direction, raise the needle
and turn the fabric.
1
7
2
6
5
3
4
Janome MC9700 Sewing Machine Instruciton Manual
www.janomeflyer.com
Memory Craft 9700 Owners Manual/ User Guide
