JanomeFlyer.com
74
2
1
3
Correcting Distorted Stretch Patterns
The sewing results of the stretch stitch patterns may
vary depending upon the sewing conditions, such as
sewing speed, type of the fabric, number of layers etc.
Always make a test sewing on a scrap piece of the
fabric that you wish to use. If decorative stretch stitch
patterns, letters, numbers or the Auto Buttonhole
stitch are distorted, correct it with the Feed Balancing
Dial.
NOTES:
In normal sewing, set the Feed Balancing Dial to the
neutral position, i.e. the Groove on the Dial is centered
with the Standard setting Mark.
Turn the Feed Balancing Dial with a coin.
1 Feed Balancing Dial
2 Standard Setting Mark
3 Groove on the Dial
Decorative stretch stitch patterns
If the pattern is compressed, turn the dial toward “
+
”.
If the pattern is drawn out, turn the dial toward “
–
”.
Letters and numbers
If the pattern is compressed, turn the dial toward “
+
”.
If the pattern is drawn out, turn the dial toward “
–
”.
Correcting stitch balance of the Auto Buttonhole
The stitch balance of the right and left rows on the
Auto Buttonhole may vary depending on conditions of
sewing. If the stitches are not balanced, correct the
unevenness with the Feed Balancing Dial.
If the right row is denser, turn the dial toward “
–
”.
If the left row is denser, turn the dial toward “
+
”.
NOTE:
Return the Feed Balancing Dial to its neutral position
when sewing is finished.
+
+
–
–
+
–
Janome MC9700 Sewing Machine Instruciton Manual
www.janomeflyer.com
Memory Craft 9700 Owners Manual/ User Guide
