AAASewing.com
82
3
7
6
5
4
8
9
10
6
5
4
3
3
7
6
5
4
8
Mark for placement of buttonhole
Starting point
Slider
There should be no gap.
Spring holder
Difference
3
Draw both threads to the left under the foot.
Insert the garment under the foot, and lower the needle
into the fabric to the starting point.
Then lower the automatic buttonhole foot.
Depress the foot control to sew a buttonhole. The
machine will stop when the buttonhole is completed.
To sew another buttonhole, you must reset the machine.
Reset by shifting the stitch selector in either direction,
or , to the next setting. Then shift the selector back
to the buttonhole setting “ ”.
5
Remove the fabric and place a pin just before the
bartack at each end, to prevent cutting bartacks. Cut the
opening with the buttonhole opener.
4
When finished, push the buttonhole lever up as far as it
will go.
6
9
10
Janome MS5027 Instruction Manual
Janome Pink Ribbon
www.aaasewing.com
MS5027 Owners Manual/ User Guide
