q
The Position of Thread Guide Bar
1. Pull the thread guide bar up as far as it will go.
2. Turn the thread guide bar so that the thread
w
guides are right above the spool pins.
q
Thread guide bar
w
Thread guide
e
Stoppers
e
r
Spool pin
*
Make sure the two stoppers on the thread guide
r
shaft, as shown, are set in at the correct position.
1, 2
Attaching the Spool Holder Cap and Net
e
1. When you use a small thread spool, pull out the
q
r
spool holder from the spool pin. Then place the
spool with its slit side up, and put the spool
holder cap on top of it.
w
q
Spool holder
w
Spool pin
e
Spool holder cap
r
Slit
1
2. If the thread slips down from the spool
during threading and/or sewing, put a net on the
spool as illustrated to prevent jamming.
q
Net
w
Spool pin
w
q
2
16
