• Threading the Lower Looper
Open the looper cover.
q
Place the spool of thread on the right side spool pin.
*
The points to thread for lower looper are marked
in green.
*
A convenient threading chart is placed on the
w
machine body inside the looper cover.
e
!0
o
r
i
y
t
u
q
1. Draw the thread through the right side thread
guide from back to front: A
*
If the thread is coming out from the thread guide
groove, pass the thread through the thread guide
hole again as shown: B
1
(A)
(B)
w
2
e
3
q
Thread guide
2. Pass the thread through the holes on the right side
of the thread guide plate as illustrated.
q
Thread guide plate
3. Hold the thread at both ends and tug gently to
ensure the thread is correctly inserted between
the tension discs. ( If the presser foot lifter is
raised, the thread easily inserts between the
tension discs.)
e
Lower looper thread tension dial
38
