11
q
LCD Display
w
e
r
NOTE:
Magnetic or electrostatic interference may cause the
LCD display to flicker.
Do not use the machine near appliances that generate
a magnetic field or an electrostatic field such as
microwave ovens.
The LCD display shows following information when the
machine is turned on.
q
Identification letter of the recommended foot
w
Stitch pattern number
e
Stitch width
r
Stitch length
Function Keys
q
Arrow key
Press “ ” or “ ” to select the stitch pattern.
Refer to page 12.
w
Stitch width adjusting key
Press “+” or “–” to change the stitch width or needle drop
position, depending on the selected stitch pattern. Refer
to
pages 29, 32 and 38.
e
Stitch length adjusting key
Press “+” or “–” to change the stitch length of the selected
pattern. You can also adjust the buttonhole density, the
evenness of darning, and the size of eyelet with this key.
Refer to pages 29, 32 and 38.
r
Thread cutter memory key
To cut the threads automatically after locking stitches,
press the thread cutter memory key.
Refer to page 27.
t
Elongation key
Press this key to elongate satin stitch patterns.
Refer to page 57.
y
Direct pattern selection keys
You can select the stitch patterns from 01 to 20 directly
by pressing the corresponding keys.
Refer to page 12.
q
w
e
r
t
y
Summary of Contents for Sewist 780DC
