2
Changing external parts
Flange plate
Pin
Fig. 2
Top cover
To remove:
1. Raise the carrying handle and remove the setscrew A.
2. Open the top cover. Pull out the flange plate from the
bobbin winder spindle (see fig. 2).
3. Remove the setscrews B and C.
4. Open the face cover. Close the top cover.
Raise the carrying handle.
Pull the top cover toward you to remove it (see fig. 4).
To attach:
1. Follow the above procedure in reverse.
To attach the flange plate, put the flange plate into the
bobbin winder, and push the flange plate down.
Turn the flange plate until it snaps to the pin of the
bobbin winder spindle (see fig 5).
Setscrew A
Carrying
handle
Top cover
Face cover
Bobbin winder
Fig. 1
Fig. 3
Fig. 4
Fig. 5
Setscrew B
Setscrew C
Summary of Contents for Skyline S5
Page 1: ...SERVICE MANUAL SKYLINE S5...
