background image

OPERATING  INSTRUCTIONS

4

COMPACT
Stripper

RULES FOR SAVE OPERATION

1.1

Electric Connection

Commandment

Warning / 
Caution

Hint / 
Clue

Forbiddance /
Prohibition

Always disconnect power plug before servicing.

Maintenance, replacement or adjustment of parts can cause serious injury or death to the
user or other persons, if the machine is connected to the power supply system.

Keep the cable away from the blade to avoid damage of the cable.

Das Run over or damage of the cable can cause an electric shock.

The machine is constructed for inside-usage only.

Danger of electric shock. Do not expose the machine to water or rain. 

Connection: power supply system – machine

Only to the given ranges on the type plate.
Check before usage.

Connection: cable – machine only with authorized cable.

Europe, Cable – Type: HAR HO5VV-3x2,5 mm² , Connector / Plug – Type: 2P+T16A-250v
Using cables with to little average or excessive length can cause damage to persons and
objects.

Electrical equipments like cables or plugs must be controlled / renewed by an
authorized electrician.  

Risk of injuries or fatalities by wrong electrical connection 

Never operate with a damaged cable or connector.

Replacement of worn or damaged cables or connectors has to be effected by a specialist or
a similar qualified person.

Improperly connecting the grounding wire can result in risk of electric shock.

Check with a qualified electrician if your in doubt as to whether the outlet is properly
grounded. Do not modify the plug provided with the tool. Never remove the grounding prong
from the plug. Do not use the tool if the cord or plug is damaged. If the plug will not fit the
outlet, have a proper outlet installed by a qualified electrician.

Do not use machine when cable is damage. 

Don't move the machine by dragging the

cable. Utilization with a damaged cable can cause an electric shock.

Non observance of the symbols, which you can see in the instruction manual or on the
machine, may result in serious injury or death for the user and other persons. Read,
understand and follow all the clues / hints, which are situated in the machine or in the
instruction manual.

Summary of Contents for 111 112 000












Reviews: