background image

  Mixing Station   CLEVER II 
  

with Stirring Device R1900 / R1800

 

 

 

- 6 - 

1. SAFETY INSTRUCTIONS  

 

3) PERSONAL SAFETY 

a)   Stay alert, watch what you are doing and use common sense when operating a  

 

mixer. Do not use a mixer while you are tired or under the influence of drugs,  

 

alcohol or medication. A moment of inattention while operating mixers may result  

 

in serious personal injury. 

 

b)   Use personal protective equipment. Always wear eye protection. Protective  

 

equipment such as a dust mask, non-skid safety shoes, hard hat or hearing  

 

protection used for appropriate conditions will reduce personal injuries.  

 

   

  

  

   

 

 

c)   Keep handles and grasping surfaces dry, clean and free from oil and grease.  

 

Slippery handles and grasping surfaces do not allow for safe handling and control  

 

of the tool in unexpected situations. 

 

 

4) SERVICE 

a)   Have your machine serviced by qualified repair person using only identical  

 

replacement parts. This will ensure that the safety of the machine is maintained. 

 

 

INTENDED USE 

 

The device is suitable for mixing of low-viscosity, self-leveling floor coatings,  

cement- based leveling and leveling compounds up to a quantity of  

approx. 70 liters. 

 

Observe the processing guidelines of the material manufacturer. 

 

The use of chemical products or solvents can affect the properties of the  

mixing tub and the machine. 

 

Check before use, whether the products to be mixed are compatible  

with the properties of the machine. 

 

The device is NOT suitable for processing food or highly viscous materials  

(e.g. concrete screed). 

 

 

Summary of Contents for CLEVER II





















Reviews: