5.1.5 Operation Panel Description
The operation panel can be used to modify the function parameters of the inverter, monitor the
working status of the inverter and control the operation (start, stop) of the inverter, etc. Its
appearance and function area are shown in the following figure:
FC100P is equipped with a double-digit LED operation panel as standard, and the keys and functions of the
operation panel are shown in Figure 5-1 Schematic diagram of the operation panel Shows as Table 5 -1
Figure5-1Schematicdiagramof the operationpanel
Table 5-1 Operation panel key description
Button
Function
Function
programming
key
First-level menu entry or exit
ENTER
Enter
Enter the menu screen step by step, confirm the setting parameters
run key
When the operation panel is controlled, start the inverter
stop/reset
a. When the operation panel is controlled, stop the inverter
b. When a fault is detected, it is a fault reset button
MFK
multi-function
selection key
Multi-function selection key : switch function according to P7-01
increment key
Increment of function parameter or parameter setting value
down key
Function parameter and parameter setting value decrement
shift key
a. Select the modification bit of the setting data
b. Cyclic switching stop/run display status parameters
4 status indicator lights and 3 unit indicator lights on the FC100P operation panel , and the
meanings of the indicator lights and display states are shown in Table 5 -2 .
Table 5
Description of the indicator lights on the operation panel
-2
logo
Indicator name
(Always on) Description
(flashing) Description
(not lit) Description
5
Janson Controls Technologies(Shenzhen) Co.,Limited
Chapter5 Operation
FC100P Series Manual V1.0
-25
PRG
RUN
STOP
