6
3.3
Unpacking
1. Take the UPS out of the PE foam.
2. Remove the packing materials.
3. Standard Package includes:
a. User's Manual
b. 1pc x AC Input Power Cord ( Not available for hard wiring connection
models)
c. (1pc for 750/1k/1.5kVA, 2pcs for 2.2k/3kVA)x IEC output cables ( for the
UPS with IEC sockets only)
d. 1set x UPS communication kit (optional)
Accessories for Tower and Rack Mount
7
3.4
Selecting Installation Position
It is necessary to select a proper environment to install the unit, in order to
minimize the possibility of damage to the UPS and extend the life of the UPS.
Please follow the instructions below:
1. Keep at least 20cm(8 inches) clearance
from the rear panel of the UPS from the
wall or other obstructions.
2. Do not block the air-flow to the
ventilation openings of the unit.
3. Please ensure the installation site
environmental conditions are in
accordance with the UPS working
specifications to avoid overheat and
excessive moisture.
4. Do not place the UPS in a dusty or
corrosive environment or near any
flammable objects.
5. This UPS is not designed for outdoor
use.
3.5
UPS Setup
The UPS offers a flexible form factor
enabling integration into a wide variety of
environments.
The UPS with space-saving design only
occupy 2U for 1000 to 3000VA.
If you are installing the UPS in a tower,
continue to the following section, “Tower
setup” otherwise; continue to “Rack-Mount
setup”.
