Janus G3, User Manual

NOTE:

 If you are on a phone line that requires a “9” or another digit to 

    call the answering service, enter a # after the 9. This will insert a 4 

    second pause. 

EXAMPLE:

# 09 # 5551212 * #

.

4.

 Enter 

# 1

 (enter second phone number to be programmed) 

* #

. (Optional)

5.

 Enter 

# 2

 (enter third phone number to be programmed) 

* #

. (Optional)

6.

 Enter 

# 3

 (enter fourth phone number to be programmed) 

* #

. (Optional)

7.

 Enter 

# 7

 and listen for the single beep. At the beep, record the 

    location message by speaking into the touch tone phone handset or 

    into the microphone of the G3 phone when using the keypad to 

    program. Enter 

0

 to end. If you want to listen to the location message 

    without changing it, enter 

# 8

.

8.

 Enter 

# * 1180183 * # 

and listen for three beeps (enables voice prompt 

    messages).

9.

 Enter 

# #

 to hang up the phone.

Optional Programming Instructions

PURPOSE:

 To Eliminate Autodialing: 

To disable the G3 unit from dialing a phone number 

(used on a ring down 

telephone line). 

• Enter 

# 94851 or #9000000

 and listen for three beeps.  

• Enter

 # 0 * #

, listen for three beeps, enter 

# 1 * #

, listen for three beeps. 

• Enter

 # 2 * #

, listen for three beeps, enter 

# 3 * #

, listen for three beeps.   

• Enter

 # * 1180180 * #

, listen for three beeps. (Optional)  

• Enter

 # #

 and hang up. 

PURPOSE:

 To Disable the Voice Prompt Message:

To disable the voice prompt from saying: 

“Elevator call, at the tone press 

one to talk, press two for location”.

• Enter 

# 94851 or #9000000

 and listen for three beeps.  

• Enter 

# * 1180180 * #

, listen for three beeps. 

• Enter

 # # 

and hang up. 

CAUTION:

 This option cannot be used with two or more number dialing.

PURPOSE:

To Disable Voice Prompt Message and Delay Voice  

Location Message:

To disable the voice prompt and have the location message play 

automatically every 19 seconds.  

• Enter: 

# 94851 or #9000000

 and listen for three beeps.  

• Enter: 

# * 1180185 * #

 and listen for three beeps.  

• Enter: 

# #

 and hang up.

PURPOSE:

To Enable Voice Prompt Message (DEFAULT):

To enable the voice prompt message to say: 

“Elevator call, at the tone 

press one to talk, press two for location”

.  

• Enter 

# 94851 or #9000000

 and listen for three beeps.  

• Enter 

# * 1180183 * #

 and listen for three beeps.  

• To program location message, see programming instructions. 

• Enter 

# #

 and hang up. 

9