1 - 6
emPC-X1600
(
Hardware Manual
)
•
Introduction
©
Janz Tec AG
Rev. 1.1
•
Internal expansion bus (iX-Bus)
•
System Power supply 9..32 VDC
•
Reset Push Button and Power LED
•
2 male 9pin D-SUB connectors, utilized by serial ports or CAN (see table above)
•
Power supply monitor
1.1.2 Hardware
Customization
Due to it’s flexible system architecture, the emPC-X1600 can be easily customized if the standard
products do not provide optimum features or price. Customization is possible even at moderate
quantities. Ask sales department for details.
Following you find a (non-complete) list of possible customization:
•
Internal SSD with up to 4 GByte MLC Flash. Soldered to PCB for improved mechanical reliability.
•
Without nvSRAM for price reduction.
•
Serial ports can be modified for RS485 physical layer (optionally isolated)
•
More CAN ports are possible by using expansion cards (in a larger housing)
•
More serial ports are possible (but not currently supported for WindowsXP)
•
Digital/Analog-IO expansion card
•
Customer specific expansion cards
•
Power supply monitor to supervise power supply voltage and one external control voltage. The
monitor can be configured to turn system on/off upon configurable thresholds and with
configurable timeouts.
1.1.3 Software
Supported by
•
Windows
XP
•
Windows XP embedded
•
Windows-CE
6.0
•
Linux,
QNX.
Contact Janz Tec for more information about the available software packages.
Summary of Contents for emPC-X1100
Page 6: ......
