emPC-X1600
(
Hardware Manual
)
•
Safety Instructions
2 - 7
2 Safety
Instructions
Refer to page iii for explanation of the warning notice system.
The product described in this documentation may be operated only by personnel qualified for the specific
task in accordance with the relevant documentation for the specific task, in particular its warning notices
and safety instructions. Qualified personnel are those who, based on their training and experience, are
capable of identifying risks and avoiding potential hazards when working with these products.
2.1 Installation
and
Maintenance
NOTICE
The product is intended to be used in industrial environments. Typical applications are
process virtualization or as a controller for industrial automation.
DANGER: Electrical Shock
Danger to life.
This product operates with 14..32 V DC SELV power supply. Do not connect this product to
an improper power supply.
WARNING: Unauthorized Opening
Improper opening of the device may result in substantial damage to the equipment.
Remove power
before
you
open
the housing of the product. Do not connect power or
operate the product until you have closed the housing and tightened
all
screws.
WARNING: Electrical Shock
The IO interfaces (connectors) of the product are only suited to be connected to SELV
circuits. Use interfaces (connectors) for their intended use only.
CAUTION: Explosive Risk
Danger of explosion when replacing with wrong type of battery.
The product equipped with a Lithium battery. Replace only with battery of the same or
equivalent type.
2.2
Ambient and Environmental Conditions
DANGER: Explosive Risk
This product is
NOT
designed to be used in potentially explosive atmosphere.
Do not operate this product in potentially explosive atmosphere.
WARNING
This product does
NOT
fulfil the requirements for a fire enclosure according to EN
60950-1 in all possible mounting positions. In these mounting positions, installation is
only permitted above concrete or other non inflammable materials.
NOTICE: Damage
Do not operate the product beyond the specified ambient conditions. Do not cover the
vent slots of the product.
NOTICE: EMI
This product is a class A device. This product may cause radio interference. In this case
the user must take adequate measures.
Rev. 1.1
©
Janz Tec AG
Summary of Contents for emPC-X1100
Page 6: ......
