2 - 8
emWEB-7
(
Hardware Manual
)
•
Safety Instructions
©
Janz Tec AG
Rev. 1.1
2
Safety Instructions
Refer to page 5 for explanation of the warning notice system.
The product described in this documentation may be operated only by personnel qualified for the
specific task in accordance with the relevant documentation for the specific task, in particular its
warning notices and safety instructions. Qualified personnel are those who, based on their training and
experience, are capable of identifying risks and avoiding potential hazards when working with these
products.
2.1
Installation and Maintenance
NOTICE
The product is intended to be used in industrial environments. Typical applications are
process virtualization.
WARNING: Unauthorized Opening
Improper opening of the device may result in substantial damage to the equipment.
Remove power
before
you
open
the housing of the product. Do not connect power or
operate the product until you have closed the housing and tightened
all
screws.
WARNING: Electrical Shock
The IO interfaces (connectors) of the product are only suited to be connected to SELV
circuits. Use interfaces (connectors) for their intended use only.
2.2
Ambient and Environmental Conditions
WARNING
This product does
NOT
fulfil the requirements for a fire enclosure according to EN
60950-1 in all possible mounting positions. In these mounting positions, installation is
only permitted above concrete or other non-inflammable materials.
NOTICE: Damage
Do not operate the product beyond the specified ambient conditions. Do not cover the
vent slots of the product.
DANGER: Electrical Shock
Danger to life.
This product operates with 9..32 V DC. Do not connect this product to an improper power
supply.
DANGER: Explosive Risk
This product is
NOT
designed to be used in potentially explosive atmosphere.
Do not operate this product in potentially explosive atmosphere.
NOTICE: EMI
This product is a class A device. This product may cause radio interference. In this case
the user must take adequate measures.