Zivo
Smart Terminal
TM
22
UM.ZV.1012.01
www.jaotech.com
Commercial in Confidence
2.3 Running the BIOS setup program
Your Zivo is likely to have been properly set up and configured by your dealer prior to
delivery. If you still find it necessary to use the BIOS (Basic Input-Output System) setup
program to change system configuration information please contact your JAOtech supplier for
support, or email JAOtech at: techsupport@jaotech.com.
The settings you specify with the setup program are recorded in a special area of memory
called CMOS RAM. This memory is backed up by a battery so that it will not be erased when
you turn off or reset the system. Whenever you turn on the power, the system reads the
settings stored in CMOS RAM and compares them to the equipment check conducted during
the power on self-test (POST). If an error occurs, an error message will be displayed on
screen, and you will be prompted to run the setup program.
2.4 Installing system software
Recent releases of operating systems from major vendors include setup programs which load
automatically and guide you through hard disk preparation and operating system installation.
The guidelines below will help you determine the steps necessary to install your operating
system on the Zivo Smart Terminal
TM
. If required, insert your operating system’s installation
or setup disc into a portable optical drive and plug into one of the Zivo USB ports.
Note: Some distributors and system integrators may have already pre-installed
system software prior to shipment of your Smart Terminal
TM
.
If you are presented with a setup/installation screen then carefully follow the instructions.
The setup program will guide you through preparation of your hard drive, and installation of
the operating system.
2.5 Installing the drivers
After installing the system software, you will be able to install the necessary drivers. All the
Zivo drivers and updates can be obtained from JAOtech.
Note: The drivers and utilities used for the Zivo Smart Terminal
TM
are subject to
change without notice. If in doubt, check with your local JAOtech office or contact
our application engineers for the latest information regarding drivers and utilities.