Zivo
Smart Terminal
TM
38
UM.ZV.1012.01
www.jaotech.com
Commercial in Confidence
APPENDIX
D
VESA mounting
This appendix describes VESA mounting.
The Zivo Smart Terminal
TM
also provides standard VESA mounting to help system integrators
conveniently integrate the terminal into their system. It is recommended that customers use
mounting brackets provided by JAOtech to ensure safe and reliable fixing.
VESA mount installation should be carried out by a professional technician. Please contact the
service technician or your JAOtech reseller if you require this service.
Follow the instructions below to mount the Zivo Smart Terminal
TM
to the JAOtech wall bracket:
1.
The Zivo wall bracket is comprised of two parts: one ‘back bracket’, and one ‘mounting
bracket’. (See Figure D.1)
2.
First attach the back bracket to the VESA mount at the back of the Zivo, securing it in
place with the four M6 Phillips-head screws provided.
3.
Attach the mounting bracket to the wall or another flat surface. The back bracket slides
vertically from the top into the mounting bracket. It can be secured to the mounting
bracket by screwing the four M3 Phillips-head screws provided through the corresponding
holes at the tops of the mounting bracket.
Warning: To avoid injury be sure to secure the screws of the wall bracket tightly.
Figure D.1: JAOtech wall bracket