5
4
ASSEMBLY INSTRUCTIONS
Two-person team is recommended for assembly.
INSTALLING INTERNAL STEM
· Lay umbrella on soft clean surface. Attach finial to canopy structure.
· Remove internal stem from bottom of mast.
· Install mast stem onto steel base with supplied 2 bolts and tighten using allen
wrench. Do not use power drill. May cause damage to base.
OPERATING INSTRUCTIONS
OPEN / CLOSE THE UMBRELLA
· Open the umbrella by sliding the push up system upwards,
until it clicks into place.
· Close the umbrella by sliding the push up system downwards.
mast stem
finial
mast stem
· Using a two-person team, carefully lift umbrella
and insert bottom of mast onto mast stem and
tighten the knobs.
· You are now ready to operate your umbrella!
FOLD CANOPY
The 100% solution dyed canopy will last longer if you fold it as it was packed
and shipped. This technique is similar to the way a parachute is folded and is
especially important when folding the canopy for seasonal storage or when left in
the closed position for an extended period of time.
Using this technique at all times will
significantly extend the life of the canopy.
· When the canopy has been fully lowered,
stand in front of the canopy structure and
begin the folding process by pulling out
two panels opposite the mast.
· Once rolled tight, pull adjacent panels
out one at a time and fold to the center,
alternating sides until all the panels have
been pulled out from the arms and folded
into the center.
· Wrap provided strap around canopy to
secure.
· When not in use, cover umbrella with
provided protective cover.
