29
Custom Programming
The keys may be defined one by one. Using the arrow keys,
scroll to any key where you wish to begin programming and
press [ENTER]. A KEY DEFINITIONS window similar to
Diagram 3.15 appears. ENABLE CLICK and ENABLE
REPEAT allow you to choose on a key-by-key basis whether
to include the same click and repeat features which were
defined in the Jarltech Keyboard Parameters window (Dia-
gram 3.12).
The ENABLE KEY function, when checked (
Ö
), allows the
key data to be sent to the host. When using dual or quad
key caps with the 8010T tactile keyboard, only a single key
under the key cap needs to be defined and enabled.
The adjacent keys under the same key cap should be dis-
abled. Disabled keys will display as <**> on the keyboard
map.
Add Shift, CTRL, ALT to key allows to add Shift, CTRL,ALT
attribute to each key.
Enable ASCII mode allows user to use the ALT-key pad (at
the right side of 101/102 keyboard) to input the data to each
key. For example, you can press down the ALT key and
type 0, 0, 4 key on the keypad at the right side of 101/
102 keyboard to define the
K
data to the key. If disable
the ASCII Mode and press <CTRL> + <d> to define a key
then you will get ^d.
Summary of Contents for 8010M
