18
(c) Set Beep time. ? * 10mS.
Beep time is the duration for the long beep tone
(error tone)
Enter ERROR BEEP TIME, Entry is a decimal
multiple of 10mS:-
100
A good value to enter here is 100.
(d) Set Click time. ? * 10mS.
Click time is the duration for the short beep tone
(valid key press tone)
Enter KEY CLICK TIME, Entry is a decimal
multiple of 10mS:-×
5
A good value to enter here is 5.
(e) Set Keyboard Data stream ID BYTE!!
Keyboard data stream ID byte is a Hex value
prefixed to all data coming from the keypad
Enter decimal ID value for the keyboard data stream
0
The keyboard has a Redirection Pointer. Each time
the Redirection Pointer changes from the RS232
port to the keypad, you can order the 8081 to send
this ID VALUE. This ID is only sent once before
the key value is sent, So the host device will know
the data has come from the keypad on the key-
board.
(f) Set Aux RS232 Data stream ID BYTE!!
Enter decimal ID VALUE for the AUXILIARY RS232
data streams:-
0