19
The keyboard has a Redirection Pointer.
Each time the Redirection Pointer changes from the
keypad to the RS232 ports, you can order the 8081
to send this ID VALUE. It is only sent once before
the incoming com port is transmitted on. So HOST
will know the data is coming from the RS232 ports
on the keyboard.
(g) Set Baud rate. 300 - 19200 BPS.
Enter keyboards baud rate -300,600,1200,2400,
4800,9600,19200
If using 8081 in keyboard wedge mode and a mag. stripe
reader or CCD barcode
scanner or other RS232 input
devices is present. The baud rate should be set at 1200
bps,and the peripherals have to be set at 1200 bps as well.
(3) Read keyboard map.
This function allows you to read (copy) keyboard
map from a keyboard and to store it in a data base
file. From which then can be changed and reloaded
back to the other keyboards.
Working ... Please Wait!
WAITING RESPONSE, FLICK PROGRAM SWITCH ON KEYBOARD!
(4) Name keyboard map.
This function asks you for a name of up to 20
characters. This is used to save the keyboard map
under an individual name.
Keyboard map name up to 20 characters:-
LINEAR
NOTE:
