63
MONTAGE
INSTALLATION / MONTAGE / MONTAJE / MONTAGGIO / MONTAGE / MONTAŻ / MONTAJ
PL
Zanim przystąpi się do montażu:
1. Przed przystąpieniem do instalacji proszę dokładnie przeczytać całą instrukcję obsługi.
2. Należy sprawdzić, czy roleta nie jest uszkodzona i czy daje się bez przeszkód odemknąć i zamknąć.
W razie potrzeby wymienić uszkodzone części.
3. Opuścić roletę do samego końca i ustalić, czy silnik powinien zostać zainstalowany w skrzyni rolety
z lewej czy z prawej strony. Układanie przewodów w środku skrzyni rolety jest niedozwolone, dlatego
zawsze trzeba wybierać najkrótszą drogę do najbliższej puszki elektroinstalacyjnej.
4. Do sterowania przełącznikami krańcowymi wykorzystuje się całkowicie nasunięty pierścień z tworzy-
wa sztucznego.
Zawsze należy się upewniać, że możliwe jest wsunięcie silnika do oporu do środka wału.
Łożysko kulkowe
Nasadka walcowa
Panewka łożyska
Wał stalowy
Otwory zaczepowe
Silnik rolet
Łożysko silnika
Sicherungssplint
Budowa / elementy rolety:
UWAGA!
Niedopuszczalny jest „próbny rozruch” silnika na zewnątrz wału. Silnik musi być całkowicie
wsunięty do środka wału, aby umożliwić działanie wyłączania krańcowego (adapter
pierścienia obrotowego na głowicy silnika).