RF warning statement
The device has been evaluated to meet Radio frequency exposure requirements.
Information about product generating electrical noise
This product complies with Radio & Telecommunication Terminal Equipment Directive (R&TTE) (1999/5/EC), the
Electromagnetic Compatibility Directive (2004/108/EC) and the Low Voltage Directive (2006/95/EC) - issued by the
Commission of the European Community, Compliance with these directives implies conformity to the following European
Standards:
EN 301 489-1
: Electronic compatibility and Radio spectrum Matters (ERM), Electromagnetic Compatibility (EMC) standard for
radio equipment and services; Part 1: Common technical requirements.
EN 301 489-17
: Electronic compatibility and Radio spectrum Matters (ERM), Electromagnetic Compatibility (EMC) standard for
radio equipment and services; Part 17: Specific conditions for 2.4 GHz wide band transmission systems and 5 GHz high
performance RLAN equipment.
EN 300 328
: (Bluetooth) Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband Transmission systems:
Data transmission equipment operating in the 2.4 GHz ISM band and using spread spectrum modulation techniques;
Harmonised EN covering essential requirements under article 3.2 of the R&TTE Directive.
EN 55022:
Radio disturbance characteristics
EN 55024:
Immunity characteristics
EN 61000-3-2
: Limits for harmonic current emissions
EN 61000-3-3:
Limitation of voltage fluctuation and flicker in low-voltage supply system
IEC 60950-1:2005:
Product Safety
The manufacturer cannot be held responsible for modifications made by the User and the consequences thereof, which may
alter the conformity of the product with the CE Marking.
The CE declaration conformity are available on our web site:
http://support.jarre.com
This product has been tested and results to comply with the limits of Class B digital device and Part 15 of the FCC Rules.
This device may generate interference if not installed in accordance to the instructions provided by the manufacturer.
Changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this product
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
Read, follow and keep the instruction manual for reference.
Clean the product only with a soft and dry fabric. Never use liquid cleaning products as it will damage the speaker.
Avoid placing the product in a location under the sunlight or near any appliance that generates heat such as an electric
heater or above other Hi-Fi product that will generate heat.Avoid locations that lack ventilation are dusty, humid or exposed
to vibration.
When charging the product make sure the charging cable is plugged correctly.
Use only spare parts and accessories specified by the product manufacturer.
Unplug the product during storms or when the product won't be used for a long period of time.
Contact a qualified worker for maintenance on the product. Maintenance will be needed if the product has any damage.
To reduce the risk of fire or electrical shock, this product should not be exposed to drop of water spray. Never try to open
the product by yourself.
Use the control switch and buttons as per stated in the instruction manual.
The system is not disconnected from the mains as long as it is connected to the AC outlet, even if the system has been
turned off.
Only use attachment or accessories specified by the manufacturer.
Install the power cord thus to avoid to from being pinched or walked on.
The mains plug of the power supply cord shall remain readily operable.
Don't not expose this product to dripping or splashing and ensure that no objects filled with liquids,such as Vases,are
placed on the product.
