Jarv DuraVibePro, User Manual

GETTING STARTED 

To use your Jarv DuraVibe Pro Bluetooth Speaker, please follow 
these steps:

1. Charge your Bluetooth speaker fully 
2. Pair your Bluetooth Speaker to a Bluetooth-enabled device prior 
to use. 

CHARGING YOUR BLUETOOTH SPEAKER

Your Jarv DuraVibe Pro Bluetooth Speaker come with a built-in 
rechargeable battery and a Micro USB charging cable. Charge 
fully before use. The battery indicator will turn red when 
charging and turn green once charging is complete. Initial 
charging time is approximately 3-4 hours.  

PAIRING YOUR BLUETOOTH SPEAKER 

In order to use your Jarv DuraVibe Pro Bluetooth Speaker with a 
Bluetooth-enabled device, you will first need to pair the two. 

1. Place the Bluetooth Speaker and the Bluetooth enabled device 
where they are easily viewable and no more than 3ft. apart. 
2. Turn ON your Bluetooth pairing function on your device
3. Turn the speaker on by pressing down the Power button for 
about 7 seconds. A Blue LED light will start flashing quickly 
indicating that the speaker is now in Pairing Mode.  
4. The speaker will appear as “DuraVibe Pro” when scanning for 
available Bluetooth devices within range. 
5-Once Pairing is successful a chime will be heard through the 
speaker 

RANGE

Be sure to keep the speaker within 30 feet (10 meters) of the 
connected media device at all times for optimal performance.

AUX CONNECTOR 

The speaker also features an AUX audio in port, simply connect 
the speaker with your non-Bluetooth mobile phone/MP3 
player/PC/laptop with the 3.5mm jack audio cable. The green 
indicator light will be on, then you can play music via wired 
connection.

LOW POWER INDICATION

The speaker will have voice prompt to remind you to recharge 
your speaker if your battery capacity is low (at about 10%).  

BICYCLE MOUNT OPTION

Camera / Speaker / Handlebar mount option - ¼ inch 20 
mounting pattern

1- Attach mount (not included) to handlebar with Philips 
screwdriver
2- Attach the speaker to the mounting screw on the mount by 
turning it clockwise until secure 
3- Adjust position of speaker and tighten the adjustment ring

(Optional handlebar mount to 
be used with speaker)

6