8
Code Search
If.your.product.does.not.respond.after.you.have.tried.all.the.codes.
for.your.brand,.or.if.your.brand.is.not.listed,.try.searching.for.your.
code.by.following.these.steps.
1.. Manually.turn.on.the.device.(
TV
,.
DVD
,.etc.).to.be.controlled.
2.. Press.and.hold.the.
SETUP
.button.until.the.red.indicator.stays.
on,.then.release.the.
SETUP
button.
3... Press.and.quickly.release.the.desired.mode.button.(
TV
,.
DVD
,.
etc.)..The.red.indicator.blinks.off.once.
4.. Press.the.
CHANNEL UP
.button.repeatedly.(up.to.300.times).
until.the.device.to.be.controlled.changes.channel..The.red.
indicator.blinks.off.with.each.button.press...If.you.accidentally.
overshoot.the.code.required,.press.the.
CHANNEL DOWN
button.to.backtrack.through.the.library.until.the.device.
changes.channel..Pressing.
CHANNEL UP
.changes.direction.to.
forward.again..
.. Press.and.release.
ENTER
to.install.the.code..
Most.users.will.store.DVD.codes.under.the.
DVD
button,.Cable.
codes.under.
CABLE
,.etc..If.(for.example).you.want.to.store.a.DVD.
code.under.
CABLE
,.first.follow.the.procedure.for.Direct.Code.Entry.
(previous.page).and.press.
CABLE
in.step.2.of.Direct.Code.Entry,.
then.enter.ANY.DVD.code.in.step.3.of.Direct.Code.Entry..Then.follow.
the.steps.for.Code.Search.on.the.previous.page..
Note
:..If.the.device.
does.not.have.a
CHANNEL UP
.button,.use.
PLAY
(DVD.only).or.
ON-
OFF
instead..Code.Search.starts.from.the.currently.stored.4.digit.
number.under.that.mode.
