background image

6

 

CHAN+

 and 

CHAN-

 buttons perform the “Page+” 

and “Page-” function for on-screen Guide Menus 

used by some Satellite systems. 

INFO

 button brings up Satellite Display screen for 

current Channel and system information. 

MENU 

brings up the Satellite Menu screen - use 

with the 

UP

DOWN

LEFT 

RIGHT 

navigation 

buttons. 

OK 

button is used for on-screen Menu selection.

EXIT 

button is used to Exit or Clear on-screen 

Menu displays.  

INPUT

 button performs the Satellite TV/SAT     

function.

This remote controls many DVD functions. The 

descriptions may vary from your original remote 

descriptions.

REW

 and 

FF

 buttons control the speed of Fast 

Forward and Reverse Playback respectively. 

CHAN+/CHAN- 

buttons respectively locate the 

succeeding or preceding Chapters or Tracks on a 

disc. 

INFO 

button brings up DVD Display or Control 

Menu for Chapter/Track/Title number, Time remain-

ing/elapsed indication, system information, etc. 

MENU 

brings up the DVD disc Menu screen - use 

with the 

UP

DOWN

LEFT 

RIGHT 

navigation 

buttons. 

OK 

button is used for on-screen Menu selection. 

Note some DVD players require the Play button to 

be used. 

EXIT 

Exit On-Screen Menus and/or Return to pre-

vious On-Screen selection.  

PLAY 

button is used to start Disc playback and for 

Menu selection on some DVD players. 

STOP 

button stops Disc playback.

PAUSE 

button pauses Disc playback - press PLAY 

to resume. 

INPUT

 brings up the DVD Players Setup Menu.

Note, not all DVD Players support all the functions 

described above.

  DVD Functions

  SAT Functions

Summary of Contents for RM24993

















Reviews: