21
DESCRIPTION OF
‘
TFT
-
LCD
’
CONTROL PANEL
Display screen options
Language Selection (continued)
From the language screen, you can rotate the control dial to scroll through the installed language options
and select your choice by pressing the control dial button.
Press the return button or home button to exit
Unit Configuration
From the settings screen, rotate the control dial to select the
‘
unit
’
tab
and then press the control
dial, you have now entered the unit option screen as shown below.
From here you can select
either metric or imperial
by pressing the control
dial button.
Imperial is the factory
setting.
Protection Status Alarm
If the machine encounters a fault or is not working correctly,
an error code maybe displayed as shown right.
The example shown is error E60 which is an
‘
over temperature
’
error.
For a detailed list of error codes, please see page 39.
Configuration Settings (Engineers mode)
From the settings screen, rotate the control dial to the
‘
configuration
’
tab
and then press the control
dial. You have now entered the engineers option screen as shown below.
From here you can access various options such as: stand by time, overvoltage protection, parameter and
factory reset modes.
Standby Time
Standby time is a function that when there is no operator activity with the plasma machine, then after a
pre
-
determined time (10 minutes as shown below) the machine will go into standby (sleep) mode.
From the configuration screen, rotate the control dial until the
‘
Stand by Time
’
option is highlighted and
press the control dial. You have now entered the unit stand by time screen as shown below where you
can adjust the stand by time between 0 to 15 minutes. (0 being off)
Summary of Contents for EVO 2.0 EP-45
Page 1: ...1 ClearVision Optional TFT LCD screen included...
Page 44: ...44 UKCA Declaration of Conformity...
Page 45: ...45 EC DECLARATION OF CONFORMITY...
Page 50: ...50...