Page 19
of the receiver module to the CN2 socket on the control panel PK-442.
Note! Check with the seller whether the hardware and software versions of the
machine support wireless remote controller before purchasing.
6. Control panel
6.1. HD digital panel
6.2. Function table of plastic display panel
a
Enable
remote
control
1. Before welding, press the remote control function
key
to enable the remote control function;
2. If the indicator is on, it indicates that the remote
control function is enabled. If the remote controller is
connected, the remote controller controls the welding
current. If no remote controller is not connected, the
welding current is controlled by the panel adjuster.
3. If the indicator is off, it indicates that the remote
a
b
c
d
e
f
g
h
