PARTS LIST
:
- 1*Counterweight
- 1*Anti-Skating Weightand clamp
- 1*Tonearm wand
- 1*Uni-Point Cup
- 1*Damping Oil
- 1*Smart Tonearm Adapter
- 1*Alignment Protractor
- 1*Tonearm Cable
- 1*Owner
’
s Manual
Mounting the arm
JS-TA297 is a 12 inch tonearm, the distance of
platter Spindle to tonearm Pivot is 297mm. So,
first of all, You have to make sure your turntable
have enough space to install it. If
possible,referalsotothemountinginstructions
fromyour turntablemanufacturer.
HOLEDIMENSIONS
JS-TA297 tonearm come with Jasmine SME2D20-
H10-B smart tonearm adapter, It's hole size and
installation method is same as the SME tonearm.
Please refer thegeometryof below picture to open hole
on your turntable.
However, the key point is that you have to make
sure that the spindle to pivot distance is 297mm
after the arm is installed.:
DIAGRAMOFARM MOUNTED
Insertthe armthroughthe arm adapter hole, adjust the
spindle to pivot distance and VTA height , fix the
screws after the arm meet the parameters you required.
