Jason International, Inc. •
501.771.4477
Page 13 of 26
Customer Service : 800.255.5766
Copyright © 2014 Jason International, Inc.
PreMIer eDITIOn aIrMasseur
®
Jason’s Premier Edition AirMasseur
®
system incorporates
all the features of the Standard Edition system and
includes the benefits of ozone sanitation system, and
an LED Chromatherapy light. To assure that your bath
functions properly, the blower control box must be properly
connected.
NOTE: For 120V systems, the power cord for the blower
control box must be plugged into a 120V, 15 amp, GFCI
dedicated circuit.
Figure 16
NOTE: This diagram also applies to 50 Hz, 240V controls,
and power supply systems. Except that the Blower junction
box must be connected into one dedicated 240V, 15 amp,
GFCI circuit.
Blower
D
C
Ozone
IMC-213
LEDs
Keypad
B
A
To Dedicated
120V / 60Hz 15A
GFCI Protected Service
C
D
Control Box
The AirMasseur® Control Box
The blower, keypad, LED light, and Ozone Sanitation Unit
must be plugged into the proper receptacles for correct
operation of the AirMasseur
®
system. See Figure 16 for
connections:
(A) The power cord for the AirMasseur
®
control box must
be connected into the proper GFCI dedicated circuit for the
system (see note).
(B) The blower’s power cord should be plugged into the
female cord connection on the ozone unit, prewired to the
control box.
(C) Eight-pin mini-DIN terminal for the AirMasseur
®
Keypad.
(D) Six-pin mini-DIN terminal for LED light.
INSTALLATION INSTRUCTIONS (cont.)