Jason International, Inc. •
501.771.4477
Page 18 of 26
Customer Service : 800.255.5766
Copyright © 2014 Jason International, Inc.
OPeRATING INSTRUCTIONS, FeATUReS, & CONTROLS
INTRODUCTION
This manual contains all of the information needed for the
proper installation and operation of your Jason bath. The
bath has been designed to give you years of relaxing trouble-
free service, provided the unit is maintained and operated in
accordance with these instructions. Thoroughly clean and
disinfect the unit as described in the CLEANING section of
the USER MAINTENANCE INSTRUCTIONS section of this
owner’s manual before its first use and periodically thereafter.
All Jason baths are pre-plumbed at the factory.
WARNING: Before operating, refer to the instructions
at the end of this owner’s manual pertaining to the risk
of fire, electric shock, or injury to persons.
AIRMASSEUR
®
OPERATION
STANDARD AND PREMIER EDITION AIRMASSEUR
®
The Jason Standard Edition AirMasseur
®
bath includes a
variable-speed, 1-HP air blower with heater, automatic purge
cycle; and three (3) massage modes: Continuous, Wave, or
Pulse; an electronic control; and a 20-minute timer.
The Jason Premier Edition AirMasseur
®
bath provides all the
features of the Standard Edition with the included benefits
of a LED Chromatherapy Mood Light, and an Ozone Sanita-
tion system.
Standard/Premier Touchpad
One main control touchpad mounted on the bath deck
contains several icons used by the bather to control the
blower, and LED mood light. A built in timer shuts the
blower off 20 minutes after being activated.
Standard/Premier Automatic Purge
Fifteen (15) minutes after the control has shut off the
blower will start again for a two-minute purge cycle that
dries the air channel. Note that the blower light will flash
during the 15-minute pause before the purge cycle begins.
Once the purge cycle begins, all indicators will light and
the keypad operation will be disabled for two (2) minutes.
SIGNATURE EDITION AIRMASSEUR
®
The Jason Signature Edition AirMasseur
®
bath includes a
variable-speed, 1-HP air blower with heater, automatic purge
cycle; and three (3) massage modes: Continuous, Wave, or
Pulse; Chromatherapy mood light, Automatic Ozone System
that will be operated any time the blower is powered; a digital
control with LCD display window; low water and temperature
sensors; and a 20-minute timer.
Signature Touchpad
A main control touchpad mounted on the bath deck features a
LCD readout which alternately indicates the water temperature
(+/- 5°F) and time remaining. The Signature Edition touchpad
allows the bather to control the blower, pump, LED mood
light and optional jetted neck pillow. A built in timer shuts
the pump and blower off 20 minutes after being activated.
Signature Automatic Purge
Twenty (20) minutes after the control has shut off the blower
will start again for a two minute purge cycle that dries the air
channel. Note that the LCD display will read “PURGE” and
begin to countdown the 10 or 20 minute pause before the
purge cycle begins. The readout will display “PURGE ON”
during the purge cycle. Any time during the pause before the
purge cycle begins, pressing and holding the Blower Speeds
icon will reduce the pause from 20 minutes to 10 minutes.
During the two-minute purge, pressing the “Blower On/Off”
icon will stop the purge.
Signature Daily Purge
The daily purge can be activated through the customized
settings of the Signature Edition touchpad. When activated,
the daily purge will start the blower for two-minutes at the
same time every day to dry the air channel. See ‘Operating
the Signature Edition AirMasseur Touchpad’ section for
details on activating this setting.
Signature Remote Control
In addition to the main control touchpad installed on the bath
deck, a floating, waterproof Universal Remote Control is pro-
vided with all Signature Edition AirMasseur
®
baths. This remote
control provides the same control functions as the bath’s main
control console, plus the bather may remotely operate a TV,
DVD, VCR, CD, etc. Refer to the Instruction Manual provided
with the remote control for detailed instructions.
Blower
The blower generates warm air and pushes it through the
air jets. Blowers provided on Jason AirMasseur
®
baths are
factory tested when assembled and again retested after
installation on the bath.
Filling And Draining
Close the drain and fill the bath with water to at least 10
inches (25 cm) below bath deck. The inlet temperature should
not exceed 40°C (104°F). When bath is in use, turn the unit
Off before draining the water. The bath unit and its plumb-
ing are designed to drain after each use whether used as
a hydrotherapy bath, soaking bath, or just taking a shower.
