Jason International, Inc. •
501.771.4477
Page 20 of 26
Customer Service : 800.255.5766
Copyright © 2014 Jason International, Inc.
Figure 22
SIGnAtURE EDItIon AIRMASSEUR
®
toUChpAD
Customized Settings
The 12 character LCD display can be customized by pressing
the AirMasseur
®
and Blower Speeds icons simultaneously
for five (5) seconds, while the system is Off.
note:
The Blower
Speeds icon will not be illuminated during this process. Use
the above figure to locate the icon. A menu (see below) will
be displayed to choose the following: Purge 24, (starts the
blower every 24 hours for two (2) minutes at the time the purge
was set); Product Test Diagnostics (see below); Temperature
(Fahrenheit or Celsius); and Language (English or Spanish).
Menu Instructions
Use the AirMasseur
®
icon to scroll through the different menu
items. Use the Blower Speeds icon to change an option. For
example, press and release the AirMasseur
®
icon to change
from Purge 24 to Product Test; press and release again to
arrive at the Temperature option. Then press and release the
Blower Speeds icon to change the temperature display from
F (Fahrenheit) to C (Celsius).
Product Test Diagnostics
After selecting the Product Test option from the menu, the unit
will perform a series of tests to confirm correct installation of
components. The test will begin by displaying the configuration
number, followed by the software revision number. Next, the
display will test the Temperature and Low Water Level sensor
(ITW-209). Next, each of the six (6) icons will begin to light.
Press the illuminated icon to proceed to the next icon. After the
icon test, the blower will start for two (2) seconds on the High
setting. Lastly, the LED Light unit will be tested. If you receive
an error on any of the tests, confirm proper installation of the
component to the correct control box. (See the CONTROL
BOX CONNECTIONS section).
Remote Control
The Signature Edition control system includes a waterproof
floating Universal Remote Control. It controls all bath functions
plus a TV, DVD, CD, etc. which can be heard through the
optional Sound Immersion Transducers (optional).
AirMasseur
®
On/Off, Mode
Blower Speeds
LED Light
IR for Remote
opERAtInG InStRUCtIonS, FEAtURES, AnD ContRolS (cont.)
OPeraTIng InsTruCTIOns
AirMasseur
®
On/Off and Mode Icon
To control the operation of the blower, simply press and release
to change the setting to Constant, Wave, Pulse or Off. A 20
minute decreasing timer will be initiated when the blower
motor starts. Press and hold the Blower icon to cycle though
blower modes. The Blower icon should remain lit as long as
the bath is connected to a power supply. The LCD will display
“Const Air” and blower speed, “Wave Air” and blower speed,
or “Pulse Air” and blower speed, while the key is pressed.
The time remaining on the purge cycle is displayed after the
bath has drained. “Purge Stop” is displayed while the key is
pressed during the purge cycle. This action will terminate the
purge cycle. The mode settings will be remembered on the
next startup.
Blower Speeds Icon
Hold the key in Constant mode to go from High to Low then
release and hold again to go from Low to High. Hold the key in
Wave and Pulse mode to go from High to Medium and Medium
to High. The system remembers the last speed setting on the
next startup. The Blower Speeds icon will light up when the
blower is running. The LED displays the blower speed from
“10” (Low) or “55”(Med) to “99” (High) while the key is pressed.
You can reduce the auto purge idle time from 20 minutes to
10 minutes, by pressing and holding the key for more than
5-seconds during the purge idle period.
LED Light Icon
Hold the icon for less than two (2) seconds to turn the lights Off
or On. Hold the icon for more than two (2) seconds to change
modes. The Light icon should remain lit as long as the bath
is connected to a power supply. This function has a two (2)
hour timer and remembers the last mode. The LCD displays
“Light On” or “Light Off” while the icon is pressed for less than
two (2) seconds. “Light Cycle” is displayed if pressed for more
than two (2) seconds.
