Jason International, Inc. •
501.771.4477
Page 12 of 16
Customer Service : 800.255.5766
Copyright © 2011 Jason International.
Figure 15
O
AirMasseur
Mode
Blower Speeds
Option
StAnDARD EDItIon AIRMASSEUR
®
toUChpAD
The Jason Standard Edition AirMasseur
®
touchpad is used to access all the functions of the blower control.
blower Speeds Icon
The Blower Speeds icon is used to increase or decrease the
blower speed once the blower is On.
- Press and hold the icon to decrease the blower speed
until the desired intensity is reached, then release.
- Press and hold the icon again to increase the blower speed
until the desired intensity is reached.
The blower will return to its highest speed on any mode
change.
option
The Option icon is used to operate an optional LED light (if
installed).
- Press the icon for less than two (2) seconds to turn the
lights Off or On.
- Hold the icon for more than two (2) seconds to change
modes.
This function has a two (2) hour timer and remembers the
last mode.
opERAtInG InStRUCtIonS, FEAtURES, AnD ContRolS (cont.)
opERAtInG InStRUCtIonS
AirMasseur
®
Icon
The AirMasseur
®
icon is used to activate the blower and the
20-minute timer.
- Pressing the Icon once starts the blower in the Constant
high speed mode.
- Pressing the icon again will turn the blower off.
Note:
The blower will always turn on in high speed.
Mode Icon
The Mode icon is used to move the blower from Constant
mode to the Wave or Pulse modes.
- Press and release the icon once to change the blower to
the Wave mode, indicated by a slow flashing light.
- Pressing the icon again will change the blower to Pulse
mode. This is indicated by a rapid light flash.
- Pressing the icon a third time moves the blower back to
Constant mode.
