Jason International, Inc. •
501.771.4477
Page 11 of 18
Customer Service : 800.255.5766
Copyright © 2011 Jason International.
OpERAting instRuctiOn, FEAtuREs, AnD cOntROLs
intRODuctiOn
This manual contains all of the information needed for the
proper installation and operation of your Jason MicroSilk-
AirMasseur bath. The bath has been designed to give you years
of relaxing trouble-free service, provided the unit is maintained
and operated in accordance with these instructions.
Thoroughly clean and disinfect the unit as described in
the
CleANING
section of the
USeR MAINTeNANCe
INSTRUCTIONS
section of this owner’s manual before its first
use and periodically thereafter.
CAUTION:
Keep hair, towels, and clothing away from the
suction fitting whenever the equipment is On. Never operate
the equipment with the suction cover off, doing so voids the
manufacturer’s warranty--it is a safety cover designed to
eliminate the potential of hair and body entrapment.
All Jason MicroSilk baths are pre-plumbed at the factory.
WARNING: before operating refer to the instructions at
the end of this owner’s manual pertaining to the risk of
fire, electric shock, or injury to persons.
FEAtuREs AnD cOntROLs
stAnDARD AnD pREmiER EDitiOn
micROsiLk-AiRmAssEuR
The Jason Standard Edition MicroSilk-AirMasseur bath
provides both a Microbubble generator unit and an air bath
system. The air bath system includes a variable-speed,
1-HP air blower with heater and three (3) massage modes:
Continuous, Wave, or Pulse. An electronic control with a
low water level sensor to prevent the MicroSilk pump from
operating without water; flow and pressure sensors to ensure
proper pump operation; and a 20-minute timer.
The Jason Premier Edition MicroSilk- AirMasseur bath
provides all the features of the Standard Edition with the
included benefits of a LED Chromatherapy Mood Light, and
an Ozone Sanitation system.
standard/premier touchpad
One main control touchpad mounted on the bath deck contains
several icons used by the bather to control the MicroSilk unit,
blower, and LED mood light. A built in timer shuts the pump
off 20 minutes after being activated.
signAtuRE EDitiOn micROsiLk-AiRmAssEuR
The Jason Signature Edition MicroSilk-AirMasseur bath
includes both a Microbubble generator unit and an air bath
system. The air bath system includes a variable-speed,
1-HP air blower with heater and three (3) massage modes:
Continuous, Wave, or Pulse. The system also includes a
Chromatherapy mood light, Automatic Ozone System that will
be operated any time the blower is powered; a digital control
with LCD display window; low water and temperature sensors;
flow and pressure sensors to ensure proper pump operation;
and a 20-minute timer.
signature touchpad
A main control touchpad mounted on the bath deck features a
LCD readout which alternately indicates the water temperature
(+/- 5
o
F) and time remaining. The Signature Edition touchpad
allows the bather to control the MicroSilk unit, blower, and LED
mood light. A built in timer shuts the pump off 20 minutes after
being activated.
signature Remote control
In addition to the main control touchpad installed on the
bath deck, a floating, waterproof Universal Remote Control
is provided with all Signature Edition MicroSilk-AirMasseur
baths. This remote control provides the same control
functions as the bath’s main control console, plus the bather
may remotely operate a TV, DVD, VCR, CD, etc. Refer to
the Instruction Manual provided with the remote control for
detailed instructions.
Jets
Strategically placed MicroSilk jets are provided for complete
enjoyment of your bath.
pumps
Pumps provided on Jason baths are factory tested when
assembled and retested after installation on the bath. These
pumps are of efficient design incorporating high quality long
life seals which provide superior service. However, should the
pump need service, suction barbs and discharge unions are
provided for easy pump removal.
microsilk unit
The MicroSilk Unit generates oxygen rich microbubbles
that fill the bath. MicroSilk units provided on Jason baths
are factory tested when assembled and again retested after
installation on the bath.
microsilk suction Fitting
The MicroSilk suction fitting is designed to provide a safe
water return to the pump. The suction fitting has an internal
filter screen and an external suction cover EZ Clean Pre-
Filter made from Lycra® material. The EZ Clean Pre-Filter is
designed to allow for easy cleaning. If the pre-filter becomes
soiled or dirty, it should be removed and cleaned with soap
and water. Periodically the internal filter screen should be
removed and cleaned with soap and water. The suction
cover can be removed by unscrewing the single Philips head
screw in the center of the suction cover (See the
USeR
MAINTeNANCe INSTRUCTIONS
section of this owner’s
manual for cleaning instructions). This will keep the system
running properly.
