Jason International, Inc. •
501.771.4477
Page 12 of 15
Customer Service : 800.255.5766
OPERATING ThE SIGNATURE EDITION AIRMASSEUR
®
TOUChPAD
fEATURES
The Jason Signature Edition Digital AirMasseur
®
touchpad
is used to access all of the functions of the control box used
in a Jason Signature Edition AirMasseur
®
bath.
OPERATING INSTRUCTIONS:
bLOwER ON/Off, MODES ICON
To control the operation of the Blower, simply press and hold
the key to change the setting to Constant, Wave, Pulse or
Off. A 20 minute decreasing timer will be initiated when the
blower motor starts. Press and release the Blower icon once
to display the current blower mode and speed. The Blower
icon should remain lit as long as the bath is connected to a
power supply. The LCD will display “Const Air” and blower
speed, “Wave Air” and blower speed, or “Pulse Air” and
blower speed, while the key is pressed. The time remaining
on the purge cycle is displayed after the bath has drained.
“Purge Stop” is displayed while the Blower On/Off key is
pressed during the purge cycle. This action will terminate
the purge cycle. The mode settings will be remembered on
the next startup.
bLOwER SPEEDS ICON
Hold the key in Constant mode to go from High to Low then
release and hold again to go from Low to High. Hold the key
in Wave and Pulse mode to go from High to Medium and
Medium to High. The system remembers the last speed setting
on the next startup. The icon will light up when the blower is
running. The LED displays the blower speed from “10” (Low)
or “55” (Med) to “99” (High) while the key is pressed. You
can reduce the auto purge idle time from 20 minutes to 10
minutes, by pressing and holding the Blower Speeds key for
more than 5-seconds during the purge idle period.
LED LIGhT (LIGhT ICON)
Hold the key for less than 2 seconds to turn the lights off
or on. Hold the key for more than 2 seconds to change
modes. The Light icon should remain lit as long as the bath
is connected to a power supply. This function has a 2 hour
timer and remembers the last mode. The LCD displays “Light
On” or “Light Off” while the key is pressed for less than 2
seconds. “Light Cycle” is displayed if pressed for more than
2 seconds.
OPTION ICON
This key is reserved for future options.
CUSTOMIZED SETTINGS
The 12 character LCD display can be customized by pressing
the Blower and Blower Speeds icons simultaneously for 5
seconds, while the system is Off. Note: The Blower Speeds
icon will not be illuminated during this process. Use the
above figure to locate the icon. A menu will be displayed to
choose the following: Purge 24, (starts blower every 24 hours
for 2 minutes at the time the purge was set); Product Test
Diagnostics; Temperature (F or C); and Language (English
or Spanish).
MENU INSTRUCTIONS
Use the Blower icon to scroll through the different menu
items. Use the Blower Speeds icon to change an option.
For example, press and release the Blower icon to change
from Purge 24 to Product Test; press and release again to
arrive at the Temperature option. Then press and release
the Blower Speeds icon to change the temperature display
from F (Fahrenheit) to C (Celsius).
PRODUCT TEST DIAGNOSTICS
After selecting the Product Test option from the menu, the unit
will perform a series of tests to confirm correct installation of
components. The test will begin by displaying the configuration
number, followed by the software revision number. Next,
the display will test the Temperature and Low Water Level
sensor (ITW-209). Next, each of the six (6) icon buttons will
begin to light. Press the illuminated button to proceed to the
next icon. After the icon test, the blower will start for two (2)
seconds on the high setting. Lastly, the LED Light unit will
be tested. If you receive an error on any of the tests, confirm
proper installation of the component to the correct control
box. (See Figure 12 on page 9.)
REMOTE CONTROL
The Signature Edition control system includes a waterproof
floating universal remote. It controls all bath functions plus
a TV, DVD, CD, etc. which can be heard through the Sound
Immersion Transducers (optional).
Figure 14
Blower On/Off, Modes
Blower Speeds
LED Light
IR for Remote
