Jason International, Inc. •
501.771.4477
Page 12 of 15
Customer Service : 800.255.5766
Copyright © 2010 Jason International.
OPERATING INSTRUCTIONS, FEATURES, AND CONTROLS (cont.)
SIGNATURE EDITION AIRMASSEUR
®
TOUChPAD
The Jason Signature Edition Digital AirMasseur
®
touchpad is used to access all of the functions of the control box used in
a Jason Signature Edition AirMasseur
®
bath.
Customized Settings
The 12 character LCD display can be customized by pressing
the Blower and Blower Speeds icons simultaneously for five
(5) seconds, while the system is Off.
note:
The Blower Speeds
icon will not be illuminated during this process. Use the above
figure to locate the icon. A menu (see below) will be displayed
to choose the following: Purge 24, (starts the blower every
24 hours for two (2) minutes at the time the purge was set);
Product Test Diagnostics (see below); Temperature (Fahrenheit
or Celsius); and Language (English or Spanish).
Menu Instructions
Use the Blower icon to scroll through the different menu
items. Use the Blower Speeds icon to change an option.
For example, press and release the Blower icon to change
from Purge 24 to Product Test; press and release again to
arrive at the Temperature option. Then press and release the
Blower Speeds icon to change the temperature display from
F (Fahrenheit) to C (Celsius).
Product Test Diagnostics
After selecting the Product Test option from the menu, the unit
will perform a series of tests to confirm correct installation of
components. The test will begin by displaying the configuration
number, followed by the software revision number. Next, the
display will test the Temperature and Low Water Level sensor
(ITW-209). Next, each of the six (6) icons will begin to light.
Press the illuminated icon to proceed to the next icon. After the
icon test, the blower will start for two (2) seconds on the High
setting. Lastly, the LED Light unit will be tested. If you receive
an error on any of the tests, confirm proper installation of the
component to the correct control box. (See the
CONTROL
BOX CONNeCTIONS
section).
Remote Control
The Signature Edition control system includes a waterproof
floating Universal Remote Control. It controls all bath functions
plus a TV, DVD, CD, etc. which can be heard through the
optional Sound Immersion Transducers (optional).
Blower On/Off, Modes
Blower Speeds
LED Light
IR for Remote
OPERATING INSTRUCTIONS
Blower On/Off and Modes Icon
To control the operation of the blower, simply press and release
to change the setting to Constant, Wave, Pulse or Off. A 20
minute decreasing timer will be initiated when the blower
motor starts. Press and hold the Blower icon to cycle though
blower modes. The Blower icon should remain lit as long as
the bath is connected to a power supply. The LCD will display
“Const Air” and blower speed, “Wave Air” and blower speed,
or “Pulse Air” and blower speed, while the key is pressed.
The time remaining on the purge cycle is displayed after the
bath has drained. “Purge Stop” is displayed while the key is
pressed during the purge cycle. This action will terminate the
purge cycle. The mode settings will be remembered on the
next startup.
Blower Speeds Icon
Hold the key in Constant mode to go from High to Low then
release and hold again to go from Low to High. Hold the key in
Wave and Pulse mode to go from High to Medium and Medium
to High. The system remembers the last speed setting on the
next startup. The Blower Speeds icon will light up when the
blower is running. The LED displays the blower speed from
“10” (Low) or “55”(Med) to “99” (High) while the key is pressed.
You can reduce the auto purge idle time from 20 minutes to
10 minutes, by pressing and holding the key for more than
5-seconds during the purge idle period.
LED Light Icon
Hold the icon for less than two (2) seconds to turn the lights Off
or On. Hold the icon for more than two (2) seconds to change
modes. The Light icon should remain lit as long as the bath
is connected to a power supply. This function has a two (2)
hour timer and remembers the last mode. The LCD displays
“Light On” or “Light Off” while the icon is pressed for less than
two (2) seconds. “Light Cycle” is displayed if pressed for more
than two (2) seconds.
