Jason International, Inc. •
501.771.4477
Page 12 of 24
Customer Service : 800.255.5766
Copyright © 2013 Jason International.
AIRMASSEUR® CONTROL BOX CONNECTIONS
STANDARD EDITION AIRMASSEUR
®
Jason’s Standard Edition AirMasseur
®
system features
the best in luxury bathing for the leisure bath industry. To
assure that your bath functions properly the blower control
must be properly connected.
NOTE: For 120v systems, the power cord for the Blower
control box must be plugged into a 120v, 15 amp GFCI
dedicated circuit.
THE BLOWER CONTROL BOX
The blower and keypad must be plugged into the proper re-
ceptacles for correct operation of the AirMasseur® system.
See Figure 15 for connections:
(A) The power cord for the blower control box must be con-
nected into the proper GFCI dedicated circuit for the system
(see note above).
(B) Pre-wired power cord to the blower.
(C) 8-pin mini-DIN terminal for the AirMasseur® keypad.
Figure 15
NOTE: This diagram (Figure 15) also applies to 50 Hz,
240v controls, and power supply systems. Except that the
Blower junction box must be connected into one dedicated
240v, 15 Amp GFCI circuit.
PREMIER EDITION AIRMASSEUR
®
Jason’s Premier Edition AirMasseur
®
system incorporates
all the features of the Standard Edition system and includes
the benefits of ozone sanitation system, and an LED
Chromatherapy light. To assure that your bath functions
properly, the blower control box must be properly
connected.
NOTE: For 120v systems, the power cord for the Blower
control box must be plugged into a 120v, 15 amp GFCI
dedicated circuit.
THE BLOWER CONTROL BOX
The blower and keypad must be plugged into the proper re-
ceptacles for correct operation of the AirMasseur® system.
See Figure 16 for connections:
(A) The power cord for the blower control box must be con-
nected into the proper GFCI dedicated circuit for the system
(see note above).
(B) Pre-wired power cord to the blower.
(C) 8-pin mini-DIN terminal for the AirMasseur® keypad.
(D) Pre-wired power cord for the ozone unit.
(E) 6-pin mini-DIN terminal for LED light.
NOTE: This diagram (Figure 16) also applies to 50 Hz,
240v controls, and power supply systems. Except that the
Blower junction box must be connected into one dedicated
240v, 15 Amp GFCI circuit.
Figure 16
