Jason International, Inc. •
501.771.4477
Page 20 of 24
Customer Service : 800.255.5766
Copyright © 2013 Jason International.
The Jason Signature Edition MicroSilk
®
digital touchpad is
used to access all the functions of the MicroSilk
®
bath.
OPERATING INSTRUCTIONS
MicroSilk
®
On/Off Icon
To control the operation of the MicroSilk
®
pump motor,
press and release for each setting: ON or OFF. A
20-minute decreasing timer will be initiated when the
pump motor starts. Press and hold the Pump icon to cycle
through each pump setting. The Pump icon lights when
the water is at operating level and the LCD displays
“System Ready”. The LCD will display “Pump On”, or
“Pump Off” when the key is pressed. It also toggles
between Temperature and Timer at 5 second intervals.
“Low Water” is displayed for 5 seconds if no water is
detected.
LED Light Icon
Hold the key for less than two (2) seconds to turn the
lights Off or On. Hold the key for more than two (2)
seconds to change modes. The Light icon should remain
lit as long as the bath is connected to a power supply.
This function has a two-hour timer and remembers the
last mode. The LCD displays “Light On” or “Light Off”
while the key is pressed for less than two (2) seconds,
“Light Cycle” is displayed if pressed for more than two (2)
seconds.
Customized Settings
The 12-character LCD display can be customized
by pressing the two Diagnostic Function icons
simultaneously for five (5) seconds, while the system
is off. Note: Use the above figure to locate the icons. A
menu will be displayed to choose the following: Product
Test Diagnostics, Temperature (°F or °C) and Language
(English or Spanish).
Menu Instructions
Use the top Diagnostic Function icon to scroll through the
different menu items. Use the bottom Diagnostic Function
icon to change an option. For example, press and
release the top icon to change from Product Test to the
Temperature option. Press and release the bottom icon to
change the temperature display from °F (Fahrenheit) to °C
(Celsius).
Product Test Diagnostics
After selecting the Product Test option from the menu,
the unit will perform a series of tests to confirm correct
installation of components. The test will begin by
displaying the configuration number, followed by the
software revision number. Next, the display will then test
the Temperature and Low Water level sensor (ITW-209).
Next, each of the six (6) icon buttons will begin to light.
Press the illuminated button to proceed to the next icon.
After the icon test, the LED Light unit will be tested. If
you receive an error on any of the tests, confirm proper
installation of component to the correct control box. (See
the CONTROL BOX CONNECTIONS section).
Remote Control
The Signature Edition control system includes a
waterproof floating Universal Remote Control. It controls
all bath functions plus a TV, DVD, CD, etc., which can
be heard through the Sound Immersion Transducers
(optional).
SIGNATURE EDITION
MICROSILK
®
TOUCHPAD
m
IR for Remote
LED Light
For Diagnostic Functions
For Diagnostic Functions
MicroSilk™ On/Off
Display Panel
®
OPERATING INSTRUCTIONS, FEATURES, AND CONTROLS (cont.)
