Jason International, Inc. •
501.771.4477
Page 8 of 12
Customer Service : 800.255.5766
FEATURES
The Jason Signature Edition Air-Whirlpool digital touchpad is
used to access all the functions of the two (2) control boxes
used on the Jason Signature Edition Air-Whirlpool bath. The
Air-Whirlpool’s 3-speed whirlpool pump can be operated
simultaneously or separately from the blower.
WHIRLPOOL ON/OFF, SPEED CONTROL
To control the operation of the whirlpool pump motor, press
and hold for each setting: High, Medium, Low, or Off. A 20
minute decreasing timer will be initiated when the pump motor
starts. Press and release the Pump icon once to display the
current pump setting. The Pump icon lights when the water is
at operating level and the LCD displays “System Ready”. The
LCd will display “pump Off”, “pump High”, “pump Medium”, or
“Pump Low” when the key is pressed. It also toggles between
Temperature and Timer at 5 second intervals. “Low Water”
is displayed for 5 seconds if no water is detected.
OPTION (“O” ICON)
This key is reserved for future options.
BLOWER ON/OFF, MODES
To control the operation of the blower, simply press and hold
the key to change the setting to Constant, Wave, Pulse or
Off. A 20 minute decreasing timer will be initiated when the
blower motor starts. Press and release the Blower icon once
to display the current blower mode and speed. The Blower
icon should remain lit as long as the bath is connected to a
power supply. The LCD will display “Const Air” and blower
speed, “Wave Air” and blower speed, or “Pulse Air” and blower
speed, while the key is pressed. The time remaining on the
purge cycle is displayed after the bath has drained. “Purge
Stop” is displayed while the key is pressed during the purge
cycle. This action will terminate the purge cycle. The mode
settings will be remembered on the next startup.
BLOWER SPEEDS
Hold the key in Constant mode to go from High to Low then
release and hold again to go from Low to High. Hold the key in
Wave and pulse mode to go from High to Medium and Medium
to High. The system remembers the last speed setting on
the next startup. The Blower Speeds icon will light up when
the blower is running. The LED displays the blower speed
from “10” (Low) or “55”(Med) to “99” (High) while the key is
pressed. You can reduce the auto purge idle time from 20
minutes to 10 minutes, by pressing and holding the key for
more than 5-seconds during the purge idle period.
LED LIGHT
Hold the key for less than two (2) seconds to turn the lights
Off or On. Hold the key for more than two (2) seconds to
change modes. The Light icon should remain lit as long as
the bath is connected to a power supply. This function has
a two-hour timer and remembers the last mode. The LCD
displays “Light On” or “Light Off while the key is pressed
for less than two (2) seconds, “Light Cycle” is displayed if
pressed for more than two (2) seconds.
CUSTOMIZED SETTINGS
The 12 character LCD display can be customized by pressing
the Blower and Blower Speeds icon simultaneously for
five (5) seconds, while the system is off.
NOTe
: The Blower
Speeds icon will not be illuminated during this process. Use
the above figure to locate the icons and LCd display. A menu
will be displayed to choose the following: Purge 24, (starts
the blower every 24 hours for two (2) minutes at the time
the purge was set), Product Test Diagnostics, Temperature
(F or C) and Language (English or Spanish).
MENU INSTRUCTIONS
Use the Blower icon to scroll through the different menu
items. Use the Blower Speeds icon to change an option.
For example, press and release the Blower icon to change
from Purge 24 to Product Test, press and release again to
arrive at the Temperature option. Press and release the
Blower Speeds icon to change the temperature display from
F (Fahrenheit) to C (Celsius).
PRODUCT TEST DIAGNOSTICS
After selecting the Product Test option from the menu, the unit
will perform a series of tests to confirm correct installation of
OPERATING THE SIGNATURE EDITION
AIR-WHIRLPOOL TOUCHPAD
IR FO R R EM O TE
BLO W ER O N /O FF, M O D ES
BLO W ER SPEED S
O PTIO N
O
LED LIG H T
JASON
W H IR LPO O L O N /O FF, SPEED C O N TR O L
SIG N ATU R E ED ITIO N AIR -W H IR LPO O L (FO R M A)
S Y S T E M
R E ADY
