Jason International, Inc. •
501.771.4477
Page 4 of 5
Customer Service : 800.255.5766
USER MAINTENANCE INSTRUCTIONS
hUMIdITy
warning: avoid high humidity levels in your home. Mold, mildew,
fungi, and bacteria which may be harmful to health thrive in areas with
continued high humidity levels; therefore, every precaution should
be taken to make sure your plumbing fixtures including bathtubs,
therapy baths or showers do not become a source of high humidity
due to improper installations or leaks.
To avoid having your plumbing fixtures become a source of
unwanted humidity, please make sure the following steps
are taken prior to installation.
1. Make sure the area where the bathtub or shower is installed is
well vented and allows enough ventilation and air circulation
to dry the bathroom environment within a short time after
taking a bath or shower.
2. If your bath or shower unit is tiled-in, use units with an
integral tile flange or make sure a tile flange kit or a similar
mechanical barrier is installed to prevent shower spray,
splash, or overflow to leak behind the bathtub.
3. Make sure the plumber properly tests your therapy bath
before it is roughed in to make sure there are no leaks and
it is installed with proper access to bath equipment.
4. Make sure that all the plumbing and fixtures in the bathroom
are in good working order and have no leaks.
5. Do not use carpeting or other materials or furniture (which
can hold moisture) in your bathroom.
6. Use disinfectant to clean any bathroom surfaces, which
are regularly exposed to moisture.
7. Clean and disinfect humidifier and dehumidifiers as
recommended by the manufacturer. Replace the air filter
on the HVAC unit once a month.
8. Clean moldy surfaces as soon as any mold appears by
using a detergent/soapy solution and appropriate household
cleaner. Always use gloves during cleaning. Dispose of
any sponges or rags used to clean mold.
CLEANING
With minimum care, the soaking bath’s acrylic-surface will retain
its high luster finish for many years. For regular cleaning use
a mild
non-AbRAsIvE
liquid detergent solution (i.e., Jason
Bath System Cleaner or a glass cleaner) and a soft, wet cloth
or sponge. Do not allow the cleaning solution to soak against
the acrylic surface for long periods of time. Rinse the bath
thoroughly after cleaning.
ACRYLIC SURFACE MAINTENANCE
Areas with minor scratches or dull surfaces can be restored
by applying commercially available plastic polish (i.e. Novus
Plastic Polish No. 2, available from a Jason dealer), followed
by an application of acrylic paste wax. Buff the surface with
a clean soft cloth.
CauTION:
Do not use sandpaper, steel wool, or abrasive rubbing
compounds.
If scratches are too deep to rub out, or if the damage penetrates
the acrylic surface, consult the dealer for recommendations
on surface repair.
REPAIR
Ref
er all plumbing or surface repair to a qualified service
technician.
When contacting the dealer or service representative,
always have the serial number, proof of purchase, and
model number available. This will insure a quick response
on warranty items. The serial number can be found on the
front page of this manual or on the small card adhered to
the back of the bath.
all warraNTY rePaIrs MusT Be
auThOrIzeD BY The MaNuFaCTurer BeFOre wOrk Is sTarTeD.
The Company warrants the products of its own manufacture to be free from defects in workmanship and
material for a period of twelve (12) months from date of installation or eighteen (18) months from date
of manufacture, whichever comes first. Any merchandise which upon Company examination proves to
be defective under normal use and service during the warranty period will be at the Company’s option
repaired, replaced or credit issued in the amount of the invoice value of the defective merchandise. All
other types of remedies are excluded. This warranty extends only to the owner of the originally installed
merchandise. The Company is not responsible for labor or other installation costs for the repair or replace-
ment of defective merchandise. Company reserves the right to substitute new or improved equipment on
any replacements. The repair or replacement of equipment shall be F.O.B. point of shipment.
This warranty shall not apply to any merchandise which has been subject to accident, alteration, abuse,
misuse, abrasives, corrosion and/or electrolysis, improper voltage supply, misapplication, careless
handling, improper installation, maintenance, abnormal chemical conditions, nor does this warranty
cover stains, discoloration or the fading of color due to improper use of chemicals or improperly main-
tained water chemistry.
This warranty shall not apply to any merchandise or parts thereof which were not manufactured by
Company. Such product or merchandise manufactured by others shall have only such warranties, in
writing, that may be extended and in force at the time by such other manufacturer or supplier.
JasON INTerNaTIONal INC. lIMITeD warraNTY
To obtain warranty service, you must contact the retailer from which the merchandise was purchased
or Company’s distributor in your area. Written notice of warranty defects must be given to the company
within thirty (30) days from the occurrence thereof. Written permission must be obtained by the retailer or
distributor from the Company before any equipment claimed defective is returned for inspection.
EXCEPT As PRovIDED HEREIn, CoMPAnY MAKEs no WARRAnTIEs EITHER EXPREssED oR
IMPLIED, As To AnY MATTER WHATsoEvER InCLUDInG THE ConDITIon oF THE MERCHAn
-
DIsE, ITs MERCHAnTAbILITY oR FITnEss FoR A PARTICULAR PURPosE. AnY WARRAnTIEs
IMPLIED bY LAW AnD noT EFFECTIvELY EXCLUDED bY THIs WARRAnTY, ARE LIMITED To
THE DURATIon AnD REMEDIEs oF THIs WARRAnTY. In no EvEnT sHALL THE CoMPAnY bE
LIAbLE FoR ConsEQUEnTIAL oR InCIDEnTAL DAMAGEs.
Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation
of incidental or consequential damages, so the above limitations may not apply to you.
This warranty gives you specific legal rights and you may also have other rights that vary from state
to state.
WARRANTy REGISTRATION: Register your product's warranty online at www.jasoninternational.com.
