© 2018 Jason
®
Hydrotherapy • tech@jasonhydrotherapy.com
Page 6 of 16
Customer Service : 800.255.5766
FEATURES, CONTROLS AND OPERATING INSTRUCTIONS (cont.)
AIRMASSEUR
®
FEATURES
Jason’s AirMasseur hydrotherapy bath fi lls the bath with
millions of warm air bubbles to create a blanket of rolling
movement, gently massaging your skin. This results in an
enhanced sense of calm and relaxation as you receive a
delicate, full body massage.
AirMasseur
®
Blower
The blower generates warm air and pushes it through
the strategically placed air jets. The Jason Integrity
®
AirMasseur system contains a variable speed-controlled
heated air blower. Blowers provided on Jason baths are
factory tested when assembled on the bath.
Air ON/OFF Button
The Air On/Off button (air
switch activator) allows
the user to turn the blower
On and Off and controls
the blower’s intensity.
Momentarily depress the
button to start or stop the
air blower. A timer will
automatically stop the air
blower after 20 minutes of
operation if it is not stopped manually.
Blower Speed
Once the blower is On, to decrease the air output, press
and hold the Air On/Off button until the desired intensity
is reached, then release the button. To increase the air
intensity, press and hold the Air On/Off button until the
desired intensity is reached, then release the button.
AirMasseur
®
Automatic Purge
Fifteen (15) minutes after the blower is stopped, the blower
will start again for a two (2) minute purge cycle that dries
the air channel.
WHIRLPOOL FEATURES
Jason’s Whirlpool hydrotherapy bath utilizes Perfect
Pressure/Perfect Flow jets that are directed at key muscle
groups allowing them to relax and rejuvenate. The strong,
rolling water fl ow and comfort of heat contribute to an
overall feeling of relaxation and decreased muscle tension.
Whirlpool Pump
Whirlpool pumps provided on Jason baths are factory
tested after installation on the bath. The pumps are of
efficient design incorporating high quality long life seals
which provide superior service. However, should the pump
need service; suction and discharge unions are provided
for easy pump removal.
Whirlpool Jets
Strategically placed whirlpool jets are provided for
complete enjoyment of your bath. The jets are specially
designed for maximum whirlpool action with directional
capabilities. By changing the direction of the jets, you
can concentrate the massaging jet stream to your area
of preference. You can also individually adjust the fl ow of
each jet.
Air ON/OFF Button
The Air On/Off button (air
switch activator) provides a
safe and convenient method
for controlling the Whirlpool
bath. The Air On/Off button
is factory mounted onto the
bath prior to shipment. To
operate, fi ll the bath to at
least two (2) inches above
the jets and press the Air
On/Off button to start or stop the whirlpool pump.
