© 2021 Jason® Hydrotherapy • 501.771.4477
Page 12 of 28
Customer Service : 800.255.5766
FEATURES, CONTROLS AND OPERATING INSTRUCTIONS (cont.)
DIGITAL KEYPAD OPERATING INSTRUCTIONS
The HOME icon will activate the keypad.
• From Standby mode, once pressed, the icon will
turn blue and the display will show the splash
screen and then the available therapy choices.
•
While equipment is running, pressing the HOME
icon will return to the MAIN STATUS screen.
•
Press and hold for two (2) seconds to turn off all
equipment and return to Standby mode.
• Starting the Whirlpool pump will turn OFF any
other therapy equipment running at that time.
HOME Icon
Menu Instructions
Use the arrows to navigate the different options available and select the check mark to choose that option. For example, press
the button beside the up arrow to change from Product Test to the Temperature option. Select the check mark to enter the
Temperature Menu. Use the arrows to change the temperature display from Fahrenheit (°F) to Celsius (°C). Once the change
has been made, use the arrows to navigate to MENU EXIT to leave the Settings Menu.
Product Test Diagnostics
After selecting the Product Test option from the menu, the unit will perform a series of tests to confirm correct installation of
components. The test will begin by displaying the software revision number. Select the check mark to proceed to the next
test. Next, each of the six (6) buttons will begin to light. Press the illuminated button to proceed to the next icon. The LED light
will be tested next. Select the check mark to verify the appropriate Red, Green, or Blue color. The display will then test the
Temperature and Low Water level sensor by indicating the current temperature and whether water has been detected in the
bath. Next, the auxiliary control box (if applicable) will be tested to ensure proper IR communication. If you receive an error on
any of the tests, confirm proper installation of components to the correct control box. (See CONTROL BOX CONNECTIONS
section)
Standby Mode
In Standby Mode, no icons will be lit. If the keypad is ON but there has been no activity for one (1) hour, the keypad will revert
to Standby Mode.
Main Status Screen
While equipment is running, the screen will display the status of the system. The active therapy status, temperature and time
remaining will be shown.
LED Icon
•
A first press of the icon will show the current LED status,
color and time remaining.
• On the next press, the icon will turn blue and the LED
lights will begin a SLOW FADE mode between all the
colors.
• A single press of the icon will progress the light to the
next mode or color.
• Press and hold the icon to cycle through the FADE mode,
release the icon to choose any custom color. This will set
the chosen color as the CUSTOM color.
• Order of Colors: Slow Fade Mode, Color Step, Purple,
Green, Red, Blue, Orange, White, Custom, then Off.
The LED icon will operate the Chromatherapy Mood
Lighting system. The LED system will operate for 2
hours before turning OFF.